Allows you to mount a pair of our Photon Booster LED modules (available separately) to the back, side or front of your bike's side cases or top case.
While
the kit is designed for our own Photon Booster LED module, you can use
it to power anything up to the 2 amp limit of each connector.
The
kit includes 2 each quick-release, waterproof connectors, waterproof
through-hole wire grommets, and die-cut 3M double-sided tape bonding
seals for our Photon Booster LED modules. It also includes 4 Posi-lock
inline connectors and 8 adhesive backed zip tie anchors
WHAT IS INCLUDED
The
kit includes 2 each quick-release, waterproof connectors, waterproof
through-hole wire grommets, and die-cut 3M double-sided tape bonding
seals for our Photon Booster LED modules. It also includes 4 Posi-lock
inline connectors and 8 adhesive backed zip tie anchors, plus full
instructions - even a drill template for our Photon Boosters.
TECH SPECS
The
kit is designed for our own Photon Booster LED module, but you can use
it to power anything up to the 2 amp limit of each connector.
It
requires two 7/32" holes in the rear or side of the case. The LED module
is held in place by the tape and the center-mounted 4mm diameter bolt.
The side case may have a wall thickness of up to 0.2". (Note: check the
thickness of your case walls - the thickness of some double-walled side
cases is more than 0.2".