Proudly Made in the USA
Add Additional LED modules
Our systems include a pair of LED modules but the controllers can supply up to 6 amps of current and can support up to 40 of our LED modules!. We sell additional pairs of red, yellow, and white LED modules, called Photon Boosters, as an accessory. You can add a double bracket and a pair of LEDs to have 2 modules on either side of your license plate or use our Side Case Kit to install an additional pair of modules to side or top cases. These items can be found in the Accessories and Components section of our store.
Connect to your Stock Lights
Convert your stock front turn signals to bright marker lights. If the turn signals are LEDs, they will also inherit our patented conspicuity flicker! The Photon Blaster “TS” systems can be wired to our LED modules and the stock turn signals. You can also use a standalone IQ-250-TS controller to convert your stock turn signals without adding our LEDs. Installation instructions and a wiring diagram are in our Photon Blaster support section.
On the rear you can convert your stock tail/brake lights to a flashing brake light and if the lights are LEDs they will also inherit our patented conspicuity flicker! Our base P3 rear systems can be wired to our LED modules and the stock tail/brake lights. You can also use a standalone IQ-260 controller to convert your stock tail/brake lights without adding our LEDs. Installation instructions and a wiring diagram are in our P3 support section.
You can even convert the stock top case light in BMW K1600GT and R1200RT model to a combined tail light/flashing brake light with our base P3 system or a standalone IQ-260 controller. Installation instructions are in our BMW K1600GT and R1200RT support sections.
Note: when converting stock lights a load resistor may be needed to prevent lamp-out and fast-flash errors.
Convert your stock front turn signals to bright marker lights. If the turn signals are LEDs, they will also inherit our patented conspicuity flicker! The Photon Blaster “TS” systems can be wired to our LED modules and the stock turn signals. You can also use a standalone IQ-250-TS controller to convert your stock turn signals without adding our LEDs. Installation instructions and a wiring diagram are in our Photon Blaster support section.
On the rear you can convert your stock tail/brake lights to a flashing brake light and if the lights are LEDs they will also inherit our patented conspicuity flicker! Our base P3 rear systems can be wired to our LED modules and the stock tail/brake lights. You can also use a standalone IQ-260 controller to convert your stock tail/brake lights without adding our LEDs. Installation instructions and a wiring diagram are in our P3 support section.
You can even convert the stock top case light in BMW K1600GT and R1200RT model to a combined tail light/flashing brake light with our base P3 system or a standalone IQ-260 controller. Installation instructions are in our BMW K1600GT and R1200RT support sections.
Note: when converting stock lights a load resistor may be needed to prevent lamp-out and fast-flash errors.
Return to the Home Page.